Danfoss AKA 245 Guide d'installation télécharger pdf (Page 13)

AKM/AK Monitor/AK Mimic Installation guide RI8BP602 © Danfoss 10/2011 13

4. Select the "AKA" / "Setup" menu from the AKM program.

Click on Router

Type address: 241:120

Click OK

241:120

Use the ﬁelds to set router lines for these two ports:

240 - 240 i RS232 (everything to 240 must be sent to the RS232

output)

241 - 241 - 125 in DANBUSS (everything to 241 must be sent to

the master on the DANBUSS output)

Then set the next gateway

Click "Router" and set address: 241: 125

Use the ﬁelds to set router lines for these two ports:

NET NUMBER - NET NUMBER IN RS232 + Phone No

241 - 241 - 0 in DANBUSS (own net = 0)

240 - 240 - 120 in DANBUSS

5. Once these settings have been made, the connection is ready.

The next step is to "see" what controllers are found at the plant.

This setting is covered in the next section.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 27 28

Pas de commentaire

Danfoss AKA 245 Guide d'installation Page 13