Danfoss VLT 8000 AQUA Instructions d'exploitation télécharger pdf (Page 18)

MG.60.N2.02 - VLT is a registered Danfoss trademark

VLT

5000 / VLT

6000 HVAC / VLT

8000 AQUA

• Connect ribbon cables.

• Connect control card cassette to hinge

at top of drive and fit into chassis.

14. Install

Ribbon

Cables

NOTE

Ribbon cables must be recon-

nected to same connections from

which removed.

IP20/NEMA 1 and IP54/NEMA 12

• Spring tension clip (A) is used as a cable

strain relief and ground point for

shielded cable.

• Insert clip through inner wall of chassis

at slot provided.

• Compress spring into clip at outer wall

of chassis.

13. Install

Spring

Tension

Clip

(A)

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 43 44

Pas de commentaire

Danfoss VLT 8000 AQUA Instructions d'exploitation Page 18