Danfoss EFIT 550 Guide de l'utilisateur télécharger pdf (Page 24)

The temperature display can be calibrated (oﬀset) so the •

thermostat shows the same temperature as another ther-

mometer in the room.

(This does not apply if the thermostat is conﬁgured to use a •

ﬂoor sensor only.)

Select the desired oﬀset value.

Press to conﬁrm.

Setting the oﬀset value only recalibrates the thermostat’s •

temperature reference point and does not adjust heating

element power.

If a thermometer and the thermostat display very diﬀer-•

ent temperature readings, one of the units is probably

faulty and should be repaired or replaced.

The economy set-back level governs how much the tem-•

perature is lowered during economy periods.

Select the desired set-back level.•

(Choose -5 °C if the temperature is to be lowered by 5 degrees).•

Installation manual

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 30 31 32

Pas de commentaire

Danfoss EFIT 550 Guide de l'utilisateur Page 24