Danfoss VLT 5000 Manuel d'instructions télécharger pdf (Page 2)

Touching the electrical parts may be fatal — even after

the equipment has been disconnected from the AC line.

To be sure that the capacitors have fully discharged,

wait 15 minutes after power has been removed before

touching any internal component

DANGE

Because the drive uses large electrolytic capacitors in its power circuitry, it can maintain a

dangerous voltage level for up to 15 minutes after power has been removed. Therefore,

always be sure that power has been removed from the drive for at least 15 minutes before

working with the power circuitry of the drive.

It is always wise to use a voltmeter to measure any potentially dangerous electrical circuit

before working on it.

1 2 3 4 5 6 7 ... 44 45

Pas de commentaire

Danfoss VLT 5000 Manuel d'instructions Page 2