Danfoss C37 Guide de l'utilisateur télécharger pdf (Page 55)

The grey

side of the

ECL Card

Extended service

32o

Service parameter(s) 78-90

78 Desired temperature for anti-bacteria function

Circuit Setting range Factory setting

II OFF / 1 ... 100 °C OFF

Set the desired temperature for the anti-bacteria function.

The DHW will be charged once a week at the set temperature

to protect against bacteria. The function is always active on

Mondays from 00:00 and the DHW is charged according to the

period set in line 80.

OFF: The anti-bacteria function is not active.

1 ... 100:

The anti-bacteria function is active at the

desired temperature.

80 Anti-bacteria function period

Circuit Setting range Factory setting

(I) / (II) 5 ... 250 min. 120 min.

Set the period for the anti-bacteria function. When the set time

expires, the anti-bacteria function is stopped.

5 ... 250:

The anti-bacteria function is active for the

set period.

The function is activated in line 78 by setting the desired anti-

bacteria temperature.

90 P3 = DHW circulation pump or DHW charging pump

Circuit Setting range Factory setting

II ON / OFF OFF

State whether the pump relay (R3) for P3 is to control a circulation

pump or a charging pump according to the heating system types

1-7 (section 10).

In heating system types 6 and 7, the DHW charging pump (P4) is

controlled via the additional module ECA 80, pump relay (R5)!

ON: Circulation pump.

OFF: Charging pump.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 77 78

Pas de commentaire

Danfoss C37 Guide de l'utilisateur Page 55