Danfoss ECtemp 535 Guide d'installation télécharger pdf (Page 13)

How to set the maximum floor temperature

Special condition: This setting only applies if a floor sensor

is used (the floor sensor or room/floor sensor option has

been set).

Note: The maximum floor temperature is set to 35°C by

default.

1. To change the default temperature setting - press the

• button.

2. Select the new temperature by using the ▲▼ but-

tons.

3. To accept the new selected temperature, press •.

4. Press installation button D to configure settings.

devireg™550devireg™550

5. Press ▲▼ (up/down) buttons to continue the next

setting.

ECtemp 535

Installation Guide 13

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20

Pas de commentaire

Danfoss ECtemp 535 Guide d'installation Page 13