Danfoss FC 100 Series Instructions d'exploitation télécharger pdf (Page 52)

[1] Bus

[2] Logic AND

[3] * Logic OR

NB!

This parameter is active only when par.8-01

Control Site

is set to [0]

Digital and control word

8-52 DC Brake Select

Option: Function:

Select control of the DC brake via the terminals (digital input) and/or via the fieldbus.

[0] Digital input

[1] Bus Activates Start command via the serial communication port or fieldbus option.

[2] Logic AND Activates Start command via the fieldbus/serial communication port, AND additionally via one of the

digital inputs.

[3] * Logic OR Activates Start command via the fieldbus/serial communication port OR via one of the digital inputs.

NB!

This parameter is active only when par.8-01

Control Site

is set to [0]

Digital and control word

8-53 Start Select

Option: Function:

Select control of the frequency converter start function via the terminals (digital input) and/or via

the fieldbus.

[0] Digital input Activates Start command via a digital input.

[1] Bus Activates Start command via the serial communication port or fieldbus option.

[2] Logic AND Activates Start command via the fieldbus/serial communication port, AND additionally via one of the

digital inputs.

[3] * Logic OR Activates Start command via the fieldbus/serial communication port OR via one of the digital inputs.

NB!

This parameter is active only when par.8-01

Control Site

is set to [0]

Digital and control word

8-54 Reversing Select

Option: Function:

Select control of the frequency converter reverse function via the terminals (digital input) and/or

via the fieldbus.

[0] * Digital input Activates Reverse command via a digital input.

[1] Bus Activates Reverse command via the serial communication port or fieldbus option.

[2] Logic AND Activates Reverse command via the fieldbus/serial communication port, AND additionally via one of

the digital inputs.

[3] Logic OR Activates Reverse command via the fieldbus/serial communication port OR via one of the digital

inputs.

8 Parameters VLT® FC 100 LonWorks

MG.11.E2.02 - VLT

is a registered Danfoss trademark

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 65 66

Commentaires sur ces manuels

Pas de commentaire

Danfoss FC 100 Series Instructions d'exploitation Page 52

Commentaires sur ces manuels

Produits connexes et manuels pour Mise en réseau Danfoss FC 100 Series