Danfoss TripleLynx CN Manuel d'utilisateur télécharger pdf (Page 39)

6.5.

Logging

[0] [Inverter]

6.5.1.

Logging Interval

[0] [Inverter]

Configure the logging interval of the individual inverter at [Inverter → Setup → Logging].

Logging intervals:

• 1 minute

• 10 minutes

• 1 hour

Illustration 6.13: Logging Interval

Note:

Web portals support differing logging intervals. Ask the service provider.

Note:

Changes to the logging interval impact:

• logging of detailed inverter data

• inverter logging capacity

For more information, refer to the section

Logging Capacity

6.5.2.

Logging Capacity

[0][Inverter]

This menu displays the current logging capacity of the data log of the particular inverter.

[Inverter → Setup→ Logging]

The logging capacity of the inverter depends on the current logging interval configuration. With

a default logging interval of 10 min., the inverter can log its detailed inverter data for a maxi-

mum of 34 days. It will then start to overwrite the old data.

6.5.3.

Delete Logs

[1] [Inverter]

At security level 1, go to [Inverter → Setup → Logging] to delete the Event, production, irradia-

tion and data log of each individual inverter.

This menu is visible in inverter and group views.

Note:

Deleting a log is an unrecoverable action and data will be lost.

6.6.

Grid Management

[1] [Plant]

This menu applies to TLX CN Pro+ variants only.

6. Setup

38 L00410583-01_02

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 68 69

Pas de commentaire

Danfoss TripleLynx CN Manuel d'utilisateur Page 39