Danfoss DLX 4.6 Guide d'installation télécharger pdf (Page 21)

Installation Guide DLX seriesL00410622-01 21

2.4.5. Network Connections

The inverter is equipped with three communication interfaces: Ethernet, CAN, and RS-485.

Ethernet provides communication between the integrated web server and a computer,

either directly or via a router/switch. CAN allows communication between several DLX

inverters. RS-485 allows communication with Danfoss compatible third party products or

to Danfoss CLX products.

Figure 2.4.11:Connection without network

1. Follower inverter

2. Master inverter

3. CAN bus cable

4. Ethernet cable

5. RS-485 cable

6. Computer

7. Data logger

2.4.5.1. Connection Procedures

Figure 2.4.12: Connection area with network terminals

1. CAN bus terminal

2. RS-485 terminal

3. Ethernet connector

4. Network cable gland

NOTICE

If multiple inverters are connected together, all inverters must be connected to the

CAN bus before Start Up to benefit from single installation setup.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 47 48

Pas de commentaire

Danfoss DLX 4.6 Guide d'installation Page 21