Danfoss DLX 4.6 Guide d'installation télécharger pdf (Page 29)

Installation Guide DLX seriesL00410622-01 29

4. Time

HH.MM (24 H)

Enter – Call up the time

Up – Increase present digit

Down – Decrease present digit

Right – Select next digit

Left – Select previous digit

Enter – Confirm

Left – Back

Right – Next

Enter – Confirm

NOTICE

The time setting must match the time on the actual installation site, otherwise

data may be overwritten!

5. Set Bus ID

Enter – Call up the digits

Up – Increase present digit

Down – Decrease present digit

Enter – Confirm

Left – Back

Right – Next

Enter – Confirm

If RS485 communication is used, set a unique bus ID for the inverter. For any follower

inverters, this will be required to be set manually under Setup > Network Setup > Bus ID

(RS485). If RS485 communication is not used, this step can be missed.

6. Set as Master Unit

Default – No

Enter – Call up the options: Yes or No

Up – Yes

Down – No

Enter – Confirm

Left – Back

Right – Next

Enter – Confirm

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 47 48

Commentaires sur ces manuels

Pas de commentaire