Danfoss ECtemp 535 Manuel d'installation télécharger pdf (Page 21)

INT

21

OFF mode

To set the thermostat in OFF mode,

you hold down ▼ until you reach 5.0°.

Now press ▼ again twice to verify that

you are not just changing the comfort

or economy temperature, depend-

ing on the mode or timer period the

thermostat is in.

The display now shows OFF.

You accept the mode by

- Press • to accept

- Leaving it ﬂashing for 10 seconds.

OFF mode is used if you want to shut

oﬀ the thermostat for a long period,

but still keeping the time setting.

The thermostat is now in OFF mode.

Two lines are shown in the display.

You leave OFF mode by pressing ▲

(0.5sec).

Restore timer default settings

To reset the thermostat to its timer

defaults as shown on page 14, do the

following:

1. Turn oﬀ the thermostat

2. While pressing the pinhole button,

turn on the thermostat. The LED will

now ﬂash red/green for 1 second

indicating the thermostat will reset.

Special features

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 27 28

Commentaires sur ces manuels

Pas de commentaire