Danfoss DLX 4.6 Guide de l'utilisateur télécharger pdf (Page 21)

User Guide DLX Series L00410623-1 21

Figure 4.2.5: Screws through the fixing clip

• Ensure that the inverter is correctly

aligned and secure in the bracket rails.

• Using a 3 mm hex key, tighten the

fixing clip with one screw into the

inverter and one into the Stringbox (if

present).

• Recommended torque is 1.0 Nm

Figure 4.2.6: Theft protection

• For theft protection: guide the lock clip

through the fixing clip, and fasten with

a padlock.

• The padlock is not a part of the scope

of supply.

NOTICE

Check that the inverter is properly fastened and secured to the bracket prior to the

electrical wiring.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 85 86

Commentaires sur ces manuels

Pas de commentaire